ANCA Grinding Solution Provides Flexible Five-Axis Machining
The TX7 Linear and TXcell Linear provide flexibility in the applications that can be put through it than other three-axis grinders more traditionally used for punch manufacturing.
ANCA’s TX7 Linear is a five-axis grinding machine used for punch manufacturing. According to ANCA, this machine offers greater flexibility in the applications that can be put through it than other three-axis grinders more traditionally used for punch manufacturing. A traditional punch grinding machine would have been capable of grinding only the outside form of the punch with a single wheel, whereas the TX7 Linear is capable of more.
The TX7 Linear features two-wheel packs, and the company’s TXcell robot offers anywhere from nine- up to 24-wheel packs, meaning a range of operations can now be done in a single setup. Aside from changing wheel packs, the TXcell robot can also be used for automated loading of tools, which means it supports unattended shifts. Having more than one wheel pack on the machine brings other benefits too. By using different roughing and finishing wheels, grinding operations can now be optimized for stock removal or fine surface finish.
The TX7 Linear and TXcell Linear are also said to be ideally suited for the use of CBN grinding wheels. Using a much smaller wheel diameter (up to 200 mm / 8" on TX7 Linear and 300 mm / 12" on TXcell Linear), CBN provides optimized grinding feed rates and requires less frequent wheel dressing. The TX7 Linear and TXcell Linear machines can reportedly grind punches within 2-3 µm with a surface finish of less than 0.1 Ra.
The TX7 Linear and TXcell Linear also enable the production of keyhole punches. These punches typically feature much more complicated OD profiles, including concave forms, and require a fundamentally different approach to grinding them. Small diameter wheels with form profiles and run at high rpm, which ANCA says the TX Linear machines can handle with ease.
RELATED CONTENT
-
Norton | Saint Gobain Abrasives' Wheels Increase Metal Removal
The Norton Winter Paradigm Plus Diamond and Winter G-Force Plus Next Generation Diamond Wheels expand the company’s grinding wheel options.
-
Darex Adds End Mill Attachment to Drill Sharpener
This LEX600 end mill attachment enables users to sharpen the primary and secondary grind on the tips of two-, three- or four-fluted end mills up to 5/8".
-
Chevalier Rotary Surface Grinders Provide Efficient Production
The FRG-400/600S Series is designed for heavy loads and is fully enclosed for CNC rotary surface grinding.